4 Troubleshooting
37
English
disk mounted inside your HP NetServer cabinet in a plastic pouch. If
you do not have a copy of this utility or would like to obtain the latest
copy, see the “Service and Support” chapter of this manual.
◊◊ Print or View Configuration: Allows you to print or view the current
system configuration, including details of which cards are detected in
the system and what resources are allocated to the cards.
◊◊ Create ECU Diskette: Creates a copy of the EISA Configuration
Utility (ECU), CFG and OVL files on a diskette.
◊◊ Create BIOS Update Diskette: Creates a diskette you can use to update
your system BIOS when the flash BIOS ROM has been corrupted and
you are unable to boot the HP NetServer Navigator CD-ROM.
◊◊ Error Message Utility: Lets you view descriptions of errors that
occur during the host Power-on Self Test (POST) and tells how to
handle the errors.
◊◊ Event Log Report Utility: Describes server management events and
lets you review a list of errors and other system events.
• BIOS Update Utility: Allows you to update system BIOS so that you can
flash to any BIOS version available on the HP NetServer Navigator CD-
ROM.
• HP JetSet Utility: If you are using an HP DAC card, the JetSet utility is
used to both configure and troubleshoot SCSI systems connected through
this interface.
• HP NetServer Saver: If your system comes with a NetServer Save Test
Disk, it is mounted in a pouch on the inside of your HP NetServer. Follow
the instructions on the disk to run NetServer Saver.
