edge switch 2/16 service manual 3–13
Repair Information
To open the Port List View, select Port List from the View menu on the navigation
control panel.
Figure 3–7: Port List View
The port row provides status information in the following columns:
• Port # - the port number (0 through 15).
• Addr - the switch logical port address in hexadecimal format (S/390 operating
mode only).
• Name - the port name configured through the Configure Ports dialog box.
• Blocked Config - the status (Blocked or Unblocked) of the port.
• State - the state of the port. Valid states are:
— Online, offline, or testing.
— Beaconing.
— Invalid Attachment.
— Link incident or link reset
— No light, not operational, or port failure.
— Segmented E_Port.
• Type - The type of port. Valid port types are a generic port (G_Port) that is not
connected to a Fibre Channel device or switch, therefore light is not transmitted;
fabric port (F_Port) that is connected to a device; or an expansion port (E_Port)
that is connected to another switch to form an interswitch link (ISL).
• Operating speed - The speed at which the port is operating.
