A SERVICE OF

logo

54
503 Clear previous minimum/maximum concen-
tration values
700 Set the display brightness level
701 Show the current reagent counter value (in
tens)
702 Reset the reagent counter
710 Set the alarm logic (low or high)
711 Show the current alarm logic
800 Show the last system error message (E08
to E10)
900* Show the current value and allow calibra-
tion to a new value
901* Show the calibration factor (0.00 to 1.00)
902* Reset the calibration factor to 1.00
999 Adjust optical LED light intensity
* Diagnostic codes reserved to technical personnel only.