A SERVICE OF

logo

45
To see the current value, press DIAG. The display will show
the last diagnostic mode and the right-most numerical digit
will blink.
Enter code 701 using the and keys.
Press DIAG and the number of measurements taken will be
displayed in tens (e.g. 8363 will be displayed as 836).
To reset the counter, press DIAG. The display will show the
last diagnostic mode and the right-most numerical digit will
blink.
Enter code 702 using the and keys.
Press DIAG; “clr” will be displayed and the analyzer will zero
the counter.
DIAG
DIAG
DIAG
DIAG