A SERVICE OF

logo

Loading Envelopes 17
Also be sure to:
Load all paper with the printable side up. It’s usually brighter or whiter.
Always load the short edge first, even when printing on 4 × 6 inch paper.
Do not load paper above the arrow on the left edge guide.
Load letterhead or preprinted paper top edge first.
If you’re using special paper, follow the instructions that came with the paper.
Loading Envelopes
1. Open the output tray.
2. Flip the feeder guard forward.
3. Load up to 10 envelopes at a time, short edge first, flap edge left, and
printable side up, against the right edge of the sheet feeder, behind the tab.
Note:
Do not place the envelopes in front of the feeder guard.
Output tray
Feeder guard
SP RX600 Users Guide.book Page 17 Thursday, January 29, 2004 1:08 PM