A SERVICE OF

logo

3.
Press the
LOAD/EJECT
button to feed the continuous paper backward
out of the printer and into a standby position. The paper is still
attached to the tractor, but is no longer in the paper path. The
PAPER OUT
light comes on when the paper is completely out of the
paper path.
Note:
Pressing the
LOAD/EJECT
button
once may not feed the paper
back enough to reach a standby position. If the PAPER
OUT light
does
not come on, press the LDAD/EJECT button again. With normal
continuous paper, you
can press the LOAD/EJECT
button up to three
times. (With continuous paper narrower than six
inches, you can
press
the LOAD/EJECT button only once.)
4.
Push the paper release lever back to the single sheet position.
Paper Handling
2-11