A SERVICE OF

logo

Running the self test
The self test can be run in draft mode or near letter quality (NLQ) mode.
Follow the steps below.
1.
Load a sheet of paper as described above.
WARNING: Never run the self test using paper that is
narrower than 8ΒΌ inches if you have an FX-850, or
14 inches
if you have an FX-1050, because you may seriously damage
the print head.
2.
Turn off the printer.
3.
While holding down the
LINE FEED
button, turn on the printer. After
printing starts, release the
LINE FEED
button.
1-16
Setting Up the
Printer