Using Printer Options
The Cut Sheet Feeder
........................................
7-2
Installation
..............................................
7-2
Setting the sheet feeder mode
...............................
7-4
Recommended paper
......................................
7-5
Paper loading
............................................
7-5
Envelope loading
.........................................
7-8
Using the cut sheet feeder
..................................
7-8
Software operation
........................................
7-9
Setting up your software
...................................
7-9
Control panel operation
...................................
7-11
Testing the printer in the cut sheet
feeder mode
...........................................
7-11
Switching from the cut sheet feeder
to continuous paper
....................................
7-12
Single sheet insertion
.....................................
7-14
The Pull Tractor
...........................................
7-15
Installation and use
......................................
7-15
When you are finished printing
.............................
7-21
Using the pull tractor alone
................................
7-21
Removing the pull tractor
.................................
7-21
Interface Boards
...........................................
7-22
Choosing an interface
.....................................
7-22
Compatible interfaces
.....................................
7-23
Removing the upper case
..................................
7-23
Installing the board
......................................
7-28
Attaching
the
upper case
..................................
7-31
Using Printer Options
7-1
