A SERVICE OF

logo

2-59
Handling Paper and Other Media | 59
Placing the Paper in the Printer
Follow these steps to place the paper in the printer:
1. Open the roll paper cover.
2. Place the roll paper in the printer as shown. (The gray end of the spindle
goes on the right.)
3. Make sure the printer is turned on, then press the l Paper Source
button until the
or icon appears on the LCD display.
4. Make sure the P Power light is not flashing, then release the paper lever.
Caution: To avoid
feeding excess paper,
make sure you don’t
select
when you’re
using roll paper.
Caution: Do not release
the paper lever while the
P Power light is flashing,
or you may damage the
printer.
7800-9800Guide.book Page 59 Monday, April 10, 2006 11:59 AM