5-148
148 | Maintaining and Transporting the Printer
6. Release the front casters and retract the stabilizer knobs.
7. Carefully roll the printer to its new location. Lock the casters and extend
the stabilizer knobs after moving.
Setting Up the Printer After Transportation
Setting up the printer after transporting it is almost identical to setting it up
for the first time.
Keep in mind that the first time you start printing after moving the printer,
the print head nozzles may be clogged—especially if the printer hasn’t been
turned on for a long time. You may need to run a cleaning cycle (page 122)
and realign the print head (page 126) to ensure good print quality.
If you have not used your printer for more than a month, you may see this
message when you turn it on:
POWER CLEANING. YOU MUST MOVE
INK LEVERS WHEN CLEANING.
Select YES, then press the Menu button
to start head cleaning.
7800-9800Guide.book Page 148 Monday, April 10, 2006 11:59 AM
