HP Emulation Mode
HP emulation command summary
This section lists the printer commands supported by HP
emulation mode. For more information on printer commands, see
the Hewlett-Packard LaserJet series IIP Technical Reference
Manual.
All commands closely emulate the LaserJet series IIP except for the
following:
ESC &l #A can be used to select the following eight paper sizes:
A4
Letter
Legal
Executive
Monarch
Commercial
10
DL
C5
This command overrides the P-SIZE setting in SelecType. Other
paper sizes cannot be specified with this command.
ESC &l # H command cannot be used to specify manual paper
feeding. The values for # produce the effects listed in the
following table. Whenever INPUT in SelecType is set to AUTO,
this command is ignored.
#
EPL-7000
LaserJet series IIP
0
eject current page
eject current page
1
feed from standard paper cassette
feed from cassette tray
2
feed from standard paper cassette
feed from manual feed slot
3
feed from standard paper cassette
ignore
4
feed from lower paper cassette when installed
ignore
ESC &l # P sets the page length and paper size. The paper sizes
available with this command are same as those available with
ESC &l #A.
Appendix C C-5
