Printing Problems
Problem
Solution
The ONLINE light is
off-
The printer stops
printing and the
display reads
PAPER OUT or
TONER OUT.
The printout is not
what you expect.
The font you
selected with
software commands
cannot be printed.
Characters not
belonging to the
selected symbol set
are being printed.
The printer is off line. Press the ON LINE
button once to set the printer on line (the
ON LINE light comes on).
Replace the component specified. See
Chapter 4 for paper loading instructions.
See Chapter 6 for imaging cartridge
replacement instructions. After replacing
the component, close the printer.
The correct orientation (portrait or
landscape) may not be selected. Make sure
that the orientation (portrait or landscape)
matches the selected font. The correct font
is not selected if the font does not contain
the selected orientation.
The font you selected with your software
may not be available. Be sure you have
installed the correct font card or cartridge.
The expected symbol set may not be
available in the printer. Be sure you have
installed the correct font card or cartridge.
The correct symbol set may not be
selected. Specify the desired symbol set
(containing international characters or
symbols) with your software or with
SelecType. Available symbol sets in
SelecType vary depending on the selected
printer mode. See Chapter 3 or Appendix
C for more information.
Troubleshooting
7-23
