Epson DFX-5000 Manual

A SERVICE OF

next previous

Character Tables

The character tables on the next two pages are selected by setting

DIP switch 1-3 or using the ESC t software command. For the

Epson Extended Graphics character table, the ESC 6 and ESC 7

software commands let you select whether hex codes 80 to 9F are

characters (ESC 6) or control codes (ESC 7).

In the tables the first digit of each hex code is in the top row and

the second digit is in the first column. The binary digits are in the

second row and second column, and the decimal codes are in the

rectangle next to the character. For example, for an uppercase A,

the hex code is 41, the binary code is 01000001, and the decimal

code is 65.

A-6

Reference Tables