Before using EpsonScript
Available interface
By connecting your Macintosh using Epson’s optional LocalTalk
interface C82312*, you can use EpsonScript with your Macintosh
computer. (If your printer has a built-in LocalTalk interface, you
can use it instead.)
Note:
0
Do not use the serial interface for this purpose, because the
Macintosh does not have a printer driver for the serial interface.
0
This cartridge cannot be used in the EPL4000/4100/4200,
EPL-7000, or EPL-8000/8100 printers. Also, this cartridge does not
work with any other printers even if the printer has a cartridge slot.
Please contact your dealer for details on whether you can use this
cartridge with later Epson printers than those listed in this manual.
0
This cartridge does not work if the optional Epson PostScript CARD
(C82609*) is installed in your printer.
Required memory
Before using this cartridge, make sure your printer has more than
1.5MB of memory. Because this cartridge generates printing data
using banding memory techniques, you should be able to print
out most documents without adding more memory.
If you connect your printer to more than one computer, you must
assign at least 1.5MB of printer memory to the channel using the
cartridge. (See your user’s guide for more details.)
However, it is recommended you increase your printer’s memory
if you print documents that require large amounts of data, such as
detailed graphics or complex layout formats.
2 Introduction
