Enter text to send (list)
To send a command string, first enter the command string in this
box. You can edit the strings in this box then copy them to the
Select command to send
list using the
Add To List
button.
You can also edit the command strings already saved in the
Select command to send
list. To edit a saved string, first select
it in the
Select command
to
send
list. The string then appears
in the
Enter text to send
list.
Add To List (button)
Click this button to copy the command strings in the
Enter text to
send
box.
Note:
The
Add
T
O
List
button is disabled if no strings are described in the
Enter text to send
box.
Delete From List (button)
You can delete the registered command strings using this button.
To delete the strings,
first
select it on the
Select command to
send
list. The string then appears in the
Enter text
to
send
list.
Send Text (button)
Click the
Send Text
button to send the selected command strings
in the
Select command to send
list to the printer. Then the
current status of the printer is displayed in the status box.
Note:
You can send any command in ASCII characters using this feature.
3-18
Using
the EpsonScript Driver Utility
