You can reset the printer by clicking the
Reset Printer
button.
Enable or disable the startup page by clicking
Enable
or
Disable.
To send printer control commands, follow the steps below:
1.
First, type in the command strings in the
Enter text to send
box.
2.
Click the
Add
T
O
List
button to copy the strings to the
Select
command to send
list.
3.
Click the command line in the
Select command to send list.
4.
Click the
Send Text
button. Then the selected command line is
sent to the printer and the current status of the printer is
displayed in the status box.
Note:
You can send any command in ASCII characters using this feature.
Select command to send (list)
The command strings are saved in this list. You can add strings
using the
Add
T
O
List
button and remove the strings using the
Delete From List
button.
Using the EpsonScript Driver Utility
3-17
