EPSON Stylus Pro 7600/9600 Revision A
Adjustment Overview 216
5.1.4.9 Cover Sensor ASSY Adjustment
Described below are the adjustment items to be made once the Cover Sensor ASSY
(p.197) has been replaced.
Adjustment items (steps):
Note "*": The gap is acceptable, if it does not permit entrance of your finger when the
Front Cover is opened and “COVER OPEN” is displayed.
5.1.4.10 PF Encoder Sensor ASSY Adjustment
Described below are the adjustment items to be made once the PF Encoder Sensor
ASSY (p.186) has been replaced.
Adjusting tools:
PF ENC sensor positioning tool #F764
Cutter Positioning Jig #F800
Scale 1000mm #F713
Scale Stopper #F714
Adjustment items (steps):
Table 5-11. Required Adjustment Items
Step Adjustment Item See
<Mechanism Adjustment>
1 Sensor position adjustment
*
p.267
<Start the Self-diagnostic Function>
(Power OFF →
[Paper Feed
∆
]
+
[Paper Feed
∇
]+[Cut/Eject]
→ Power ON)
p.220
2 Testing will be executed by "Sensor" (Test menu) → “Cover” p.224
Table 5-12. Required Adjustment Items
Step Adjustment Item See
<Mechanism Adjustment>
1 PF ENC Installation Position Adjustment p.272
<Start the Self-diagnostic Function>
(Power OFF →
[Paper Feed
∆
]
+
[Paper Feed
∇
]+[Cut/Eject]
→ Power ON)
p.220
2 Feed Correction + T&B Adjustment p.239
3 Rear Sensor Position Adjustment p.243
