256 Understanding the Printer Menus
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This
uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a value between 1 and 60 minutes for power saver mode if you want a balance between energy consumption
and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer or remote fax machine. You can also change the status of the printer to the standby mode by pressing any
button on the operator panel.
Date & Time
Purpose:
To specify the date and time formats.
Va lues:
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Va lues:
NOTE: The default for mm/inch varies depending on other settings, such as Country and Document Size.
Display Brightness
Purpose:
To adjust the screen brightness of the touch panel.
Va lues:
Audio Tone
Purpose:
To configure settings for tones emitted by the printer during operation or when a warning message appears.
Time Zone Sets the time zone.
Date Sets the date depending on the
Format settings.
Format Sets the date format.
Time Sets the time.
Format 12 Hour Sets the time in 12-hour format.
24 Hour Sets the time in 24-hour format.
Millimeters(mm)
*
Selects millimeter as the default measurement unit.
Inches(") Selects inch as the default measurement unit.
5
*
Sets the brightness in ten levels, with ten being the brightest.
Available Range: 1-10
