5-13
Installation Guide for Cisco Unity Release 5.x with IBM Lotus Domino (Without Failover)
OL-13599-01
Chapter 5 Customizing the Cisco Unity Platform
Verifying the IP Address and the Network Connection
–
Any Domino server that homes Cisco Unity subscriber mailboxes.
–
The domain controller/global catalog server on which you will create Cisco Unity installation
and services accounts in the “
Creating Accounts for the Installation and Granting Permissions”
chapter.
• If the Cisco Unity server is separated from any of the following servers by a firewall, open the
applicable TCP and UDP ports:
–
DNS servers.
–
Workstations that are used to administer Cisco Unity.
–
Client workstations that will be used to access Cisco Unity via DUC for Cisco and/or the
Cisco
Personal Communications Assistant (Cisco PCA).
–
Cisco Unified CM servers.
–
SIP end points.
–
SCCP phones.
For details on the TCP/UDP ports that must be opened in a firewall to allow communication between
Cisco
Unity and other servers, see the “IP Communications Required by Cisco Unity” chapter in the
Security Guide for Cisco
Unity 5.x at
http://www.cisco.com/en/US/products/sw/voicesw/ps2237/prod_maintenance_guides_list.html.
To Configure TCP/IP Properties
Step 1 On the Windows Start menu, click Settings > Control Panel > Network and Dial-Up Connections >
Local Area Connection.
Step 2 Click Properties.
Step 3 In the Components Checked Are Used by This Connection list, check the Internet Protocol (TCP/IP)
check box.
Step 4 Click Internet Protocol (TCP/IP) (but do not uncheck the check box), and click Properties.
Step 5 Enter IP addresses for the Cisco Unity server and for the preferred and alternate DNS servers (for more
information, refer to Windows Help).
Step 6 Click OK
Step 7 Restart the server.
Verifying the IP Address and the Network Connection
To Verify the IP Address and the Network Connection
Step 1 On the Windows Start menu, click Programs > Accessories > Command Prompt.
Step 2 In the Command Prompt window, enter ipconfig /all, and press Enter.
Step 3 Verify the IP address of the Cisco Unity server.