DS71-MD4 Serial host and 56k Modem
20
Header
If enabled, the following header appears with the main menu upon initialization of power or after a
modem connection to the host module has been established. If disabled, the header does not appear with
the main menu. Default Header is enabled.
Access Control
This feature configures the Serial and Modem port access by enabling the module to prompt for user
name and password. Default for both is disabled.
CAUTION: Before you enable the password for either Serial Port or Network access, verify the
admin password is known, or you could create a lockout condition. If the password lockout
condition occurs, you will need to reset the DS71-MD4 host module to the factory defaults.
The host module confirms the option you selected to change.
Menu
This allows the admin to enable or disable the Menu on start up. If disabled, the header appears upon
login without the main menu. To invoke the main menu when disabled, enter the attention character five
times (;;;;;).
The default user and password is “admin/baytech”, all lower case.
Manage Users
This option allows the administrator to change user passwords or add/delete new users. Up to 19 users
plus an administrator allowed. Usernames are case sensitive and alphanumeric.
NOTE: The “admin” can not be deleted.
Header Text :Enable
Enable ? (Y/N, CR for no change):
Access Control:
Serial Port access:
1)...Prompt for User Name: Disabled
2)...Prompt for Password : Disabled
Modem Port access:
3)...Prompt for User Name: Disabled
4)...Prompt for Password : Disabled
Enter Select :
Enable prompt for network user name? (Y/N)>y
Menu Mode :Enable
Enable ? (Y/N, CR for no change):
