Cisco Systems 4000 Manual

A SERVICE OF

next previous

1-43

Catalyst 4500 Series Module Installation Guide

78-13267-06

Chapter 1 Module Overview and Specifications

Switching Module LEDs

Figure 1-39 WS-X4019 Backplane Channel Module

Note The backplane channel module is supported by only the WS-X4013 supervisor

engine in the Catalyst 4006, 4503, or 4506 switches using the Catalyst Operating

System.

Access Gateway Module (WS-X4604-GWY)

The Access Gateway Module is described in the Catalyst 4000 Access Gateway

Module Installation and Configuration Note (DOC-7810818).

Switching Module LEDs

Each switching module has one LED labeled STATUS that provides information

about the module and one numbered LED labeled LINK for each port on the

module. Figure 1-40 shows the Gigabit Ethernet port and status LEDs.

Figure 1-41 shows the 10/100BASE-T port LEDs. Table 1-3 describes the

switching module LEDs.

Connector type –

Cable type –

Specification Description

38301

STATUS