1-25
Catalyst 4500 Series Module Installation Guide
78-13267-06
Chapter 1 Module Overview and Specifications
Ethernet and Fast Ethernet Switching Modules
Figure 1-23 WS-X4232-GB-RJ 2-Port Gigabit and 32-Port 10/100BASE-T Ethernet Switching Module
WS-X4232-L3
The WS-X4232-L3 Layer 3 services module (see Figure 1-24) has the following
specifications:
Connector type RJ-45 10/100BASE-TX ports (See Figure 2-1 on
page 2-2.)
SC-type 1000BASE-X ports
1
(See Figure 2-16 on
page 2-18.)
Cable type Category 5 UTP (10/100BASE-TX)
MMF or SMF (1000BASE-X)
1. See the “Installing, Removing, and Maintaining GBICs” section on page 2-8 for GBIC support
information.
Specification Description
16672
1
13
1
13
Specification Description
Module type Layer 3 services module
Port duplex mode Half or full duplex mode on the 10/100BASE-TX
ports
Full duplex mode on the 1000BASE-X Layer 3 ports
Port speed 10, 100, and 1000 Mbps
Number of ports 32 10/100BASE-TX ports
2 1000BASE-X ports
1 console port
1 10BASE-T uplink port
