Administration: General Information
System Information
Cisco Small Business 200 Series Smart Switch Administration Guide 56
5
System Information
The System Summary page provides a graphic view of the device, and displays
device status, hardware information, firmware version information, general PoE
status, and other items.
Displaying the System Summary
To view system information, click Status and Statistics > System Summary.
The System Summary page contains system and hardware information.
System Information:
• System Description—A description of the system.
• System Location—Physical location of the device. Click Edit to go the
System Settings page to enter this information.
• System Contact—Name of a contact person. Click Edit to go the System
Settings page to enter this information.
• Host Name—Name of the device. Click Edit to go the System Settings
page to enter this information. By default, the device hostname is
composed of the word device concatenated with the three least significant
bytes of the device MAC address (the six furthest right hexadecimal digits).
• System Object ID—Unique vendor identification of the network
management subsystem contained in the entity (used in SNMP).
• System Uptime—Time that has elapsed since the last reboot.
• Current Time—Current system time.
• Base MAC Address—Device MAC address.
• Jumbo Frames—Jumbo frame support status. This support can be
enabled or disabled by using the Port Settings page of the Port
Management menu.
NOTE Jumbo frames support takes effect only after it is enabled, and after
the device is rebooted.
TCP/UDP Services Status:
• HTTP Service—Displays whether HTTP is enabled/disabled.
