VLAN Management
Voice VLAN
Cisco Small Business 200 Series Smart Switch Administration Guide 186
12
NOTE Step 7 and Step 8 are optional as they are enabled by default.
Workflow2: To configure the Telephony OUI Method
STEP 1 Open the VLAN Management > Voice VLAN > Properties page. Set Dynamic Voice
VLAN to Enable Telephony OUI.
NOTE If the device is currently in Auto Voice VLAN mode, you must disable
it before you can enable Telephony OUI.
STEP 2 Configure Telephony OUI in the Telephony OUI page.
STEP 3 Configure Telephony OUI VLAN membership for ports in the Telephony OUI
Interface page.
Configuring Voice VLAN
This section describes how to configure voice VLAN. It covers the following
topics:
• Configuring Voice VLAN Properties
• Displaying Auto Voice VLAN Settings
• Configuring Telephony OUI
Configuring Voice VLAN Properties
Use the Voice VLAN Properties page for the following:
• View how voice VLAN is currently configured.
• Configure the VLAN ID of the Voice VLAN.
• Configure voice VLAN QoS settings.
• Configure the voice VLAN mode (Telephony OUI or Auto Voice VLAN).
• Configure how Auto Voice VLAN is triggered.
