13258 11/01
ADVANCED FEATURES
WARNING -
The following describes the advanced features of the processor. Since changing some of
these functions may cause severe effects such as no sound or no remote control operation, we suggest you leave
this menu disabled (hidden) for normal operation. If you are unsure of what you are changing
DO NOT
perform
any advanced operations. These features may be activated by simultaneously pressing the SLEEP, DOWN, and
UP buttons on the front panel of the processor.
Advanced
Usually these settings may be left set to the factory defaults. However, these settings allow additional
modifications to the operation of your processor. Make sure you are in the SETUP SYSTEM MENUS and your
remote is in B&K mode.
From Remote From Front Panel Action
1
(PAUSE) or
(STOP)
(UP) or (DOWN) move to Advanced
2
SEL or ENTER
↵
(ENTER)
activate ADVANCED SYSTEM SETUP
Zone 1 Setup (A)
Zone 1 (A) Configuration will allow you to set maximum volume level, remote control ‘Zone’ ID, OSD enable, V1
tape mode and surround operation for Zone 1 (A). Make sure you are in the ADVANCED SYSTEM SETUP menu
and the remote is in B&K mode.
3 Zone 1 Favorite Presets
4 Zone 2 Favorite Presets
3 On Sreen Display Enabled
