CT-1 System Integrator P/N: 52615
The CT-1 is used to link multiple CT products together using IR as the communication interface. One CT-1
can accommodate 3 CT products, 9 shared sources, a CK1.2 Keypad and one home theater piece. The CT-1
makes operation of shared identical sources possible between multiple CT products, it also makes future
expansion of a system simple. Please refer to the System Expansion section of this manual for more infor-
mation on using the CT-1.
RJ-45 to 5 position Phoenix Adapter
P/N: 21419
These adapters allow termination into RJ-45 for easy
connection into the back panel of a CT product.
Standard Category 5 cabling can be used to install the
keypads. These adapters are available through
B&K Components or B & K dealers.
DB-9 to RJ-45 Adapter
P/N:13290
Included with any CT Receiver product, this adapter allows easy inter-
face between a PC and any B&K product using a standard terminated
CAT5 cable. The adapter plugs into the serial port of the PC.
***Warning - PC requirements - 128MB RAM, Pentium grade or better
processor, Windows 98SE operating system or greater. (Exception -
BKcSuite not supported on Windows NT) ***
BK Toolbox CD-ROM P/N: 13323
B&K offers PC based setup software (BKcSuite) for all of its receivers and preamplifiers . BKcSuite is
designed to expedite the setup process by allowing users to edit presets, save files and create templates vir-
tually before downloading them to the unit. The Toolbox CD-ROM includes programming software for B&K
receivers/processors plus the SR10.1 remote control and CK1.2 Keypad. A PDF library of the B&K product
line is also included with BKcSuite. The library includes B&K product manuals past and present, systems dia-
grams and reference material for RS-232 communication. Additional information is available on the web at
www
.bkcomp.com.
Accessories
