Host Table
The Host Table form enables you to keep a table of hostnames and IP addresses that compose
your local network and provides information on your environment.
To define the console server’s IP address and hostname
1. Go to Network - Host Tables. The Host Tables form appears.
2. To edit a host, select the host IP address from the list and click the Edit button.
3. To add a host, click the Add button. The host table dialog box appears.
4. Enter the new or modified host address in the IP Address field and the hostname in the
Name field.
NOTE: IPv6mustbe enabledunder HostSettingstoaddor editIPv6hostaddresses.
5. Click OK.
6. To delete a host, select the host you wish to delete and click Delete.
7. Click apply changes.
Static Routes
The Static Routes form allows you to add routes manually. The Routing Table defines which
interface should transmit an IP packet based on destination IP information. Static routes are a
quick and effective way to route data from one subnet to another.
NOTE: IPv6mustbe enabledunder HostSettingsfor addingor editingIPv6addressing.
The following table describes the fields that appear when you select a routing type from the
New/Modify Route dialog boxes.
Field or Menu Name Definition
Route ChoicesareDefault,Networkor Host.
NetworkIP
AppearsonlywhenNetworkrouteisselected.Typethe IPaddressofthe
destinationnetwork.
NOTE: IPv6mustbe enabledbefore IPv6addressesareallowed.
Networkmask
AppearsonlywhenNetworkrouteisselected.Typethe netmaskofthe
destinationnetwork.
Table 7.12: Routing Type Fields in the New/Modify Route Dialog Box
86 Cyclades
®
ACS5000 Installation/Administration/User Guide
