Protect PV.500 Operating Instructions
80000041664 BAL 71 of 73
Use the bottom key with the measuring instrument symbol to call
up menus with detailed information on the status and the meas-
ured values. This key flashes in the event of a fault in the unit, en-
abling you to access menus containing additional fault information
directly.
8.3.4 Status/Measured Values
You can call up the “Status/Measured values” menu from the op-
erating display
using the bottom key with the measuring instrument symbol.
Here you can use the “<”, “>”, “^” and ENTER keys to open the
submenus containing the statuses and measured values for the
individual unit components.
Press the ENTER key to return to the Status/Measured values
menu.
## $ ##
%&'
(
)
*
Figure 39 Menu: Status/Measured values
You can use the “Photovoltaics” menu item to display the meas-
ured values for the panels. Any faults in the DC distribution are
shown here too.
## ( ##
&
+)
,-./ 0 1#-"/ 2
+)
,-%/ 342
(
+)
-"5/ 4
Figure 40 Photovoltaics menu
You can use the “Incoming mains” menu item to display the meas-
ured values for the incoming mains. Any mains faults or faults in
the AC distribution are shown here too.
## * ##
&
62#72
,-./
62#7
,,-%/ 4 4 4
,,,,-89/ ,
Figure 41 Menu: Incoming mains
[kohm]
