Configuring User Groups
3-18 41-001190-01 Rel. 1.1, Rev. 00
AastraLink Pro 160 Administrator Guide
Ring Tone Patterns
In IP Telephony, different ringing patterns have different frequencies and
cadences. Ring cadence is the ringing pattern heard by the called party, before
they pick up the call. The IP phones use the following Bellcore-specified tones by
default:
Ring Tone Pattern
Transfer to Specifies where the incoming call is transferred to if
there is no answer or if there is a busy signal on the
User Group’s phones. Valid values are:
• None (default)
• Extension
•Voicemail
• Auto-Attendant
Note: If you choose extension, you must specify the
extension at the “Transfer Number” parameter.
Transfer Number Specifies the phone number or extension to transfer
unanswered incoming calls to. Valid values are the
registered phones with their extensions in your
AastraLink Pro 160 network.
Group Membership Specifies the members of the User Group with their
extensions. Only the members selected become part
of the User Group you define. Default is NO
MEMBERS.
Call Criteria Bellcore Tones
internal calls Bellcore-dr2
external calls Bellcore-dr3
calls with contact list Bellcore-dr4
calls with specific time frames Bellcore-dr5
Parameter Description
