York DY 036 Air Conditioner User Manual


  Open as PDF
of 36
 
343615-YTG-A-0807
10 Unitary Products Group
TABLE 8: DY048 INDOOR SOUND POWER LEVELS (HORIZONTAL DUCTED INLET)
UNIT DESCRIPTION / MODEL
CONFIGURATION
Indoor Blower Speed (RPM)
Blower Static Pressure (IWG)
Airflow (CFM)
Blower Motor BHP
63 74 97 74 95 77 90 77 90
125 70 86 69 86 73 78 72 77
250 53 58 52 57 60 61 58 61
500 49 55 47 54 54 56 51 53
1000 4242383950554545
2000 4044384348514546
4000 3844364148524345
8000 4243424445484445
DY048 / 4 Ton
Horizontal Ducted Inlet
766 769 1077 1087
0.2 0.5 0.4 1.0
1.24 0.90
1484 993 2270 1406
Cooling
Operation
2
(dB)
ID Blower
Only (dB)
0.67 0.54
Cooling
Operation
2
(dB)
1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.
2. Cooling Operation – ID blower, compressor and outdoor fan operating.
3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).
Cooling
Operation
2
(dB)
ID Blower
Only (dB)
Cooling
Operation
2
(dB)
ID Blower
Only (dB)
Octave Center Freq.
ID Blower
Only (dB)
4. Test duct termination is flush with reverberation room wall.
5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.
TABLE 9: DY048 INDOOR SOUND POWER LEVELS (HORIZONTAL DUCTED DISCHARGE)
UNIT DESCRIPTION / MODEL
CONFIGURATION
Indoor Blower Speed (RPM)
Blower Static Pressure (IWG)
Airflow (CFM)
Blower Motor BHP
63 77 97 75 95 84 91 82 91
125 72 86 69 85 81 83 78 80
250 60 62 57 59 71 71 66 67
500 53 56 49 54 60 61 55 56
1000 4747424358595252
2000 4546404354555050
4000 4647404257585252
8000 4747454554544849
DY048 / 4 Ton
Horizontal Ducted Discharge
766 769 1077 1087
0.2 0.5 0.4 1.0
1484 993 2270 1406
0.67 0.54 1.24 0.90
Cooling
Operation
2
(dB)
1. Tested in accordance with ARI Standard 260. Refer to 2001 Standard for Sound Rating of Ducted Air Moving and Conditioning Equipment.
Cooling
Operation
2
(dB)
ID Blower
Only (dB)
Cooling
Operation
2
(dB)
ID Blower
Only (dB)
Octave Center Freq.
ID Blower
Only (dB)
4. Test duct termination is flush with reverberation room wall.
5. Duct end (sound reflection) correction: (11, 6, 3, 1, 0, 0, 0, 0) dB at (63, 125, 250, 500, 1k, 4k, 8k) Hz.
2. Cooling Operation – ID blower, compressor and outdoor fan operating.
3. Test Duct Dimension: 12 in. wide x 18 in. high x 8 ft. long (0.30m x 0.46m x 2.44m).
Cooling
Operation
2
(dB)
ID Blower
Only (dB)
 previous next