Filter
Top Products
25
MAINTENANCE and SERVICING
For a complete list of spare parts and accessories contact your Yeoman retailer or call 01392 474011
1. ANNUAL SERVICE
1.1 Before the start of the heating season strip, inspect and
clean the appliance as detailed:
—Allow appliance to cool.
—Remove all internal parts: baffle, log guard and, for
multi-fuel versions, grate system and ashpan
(see Installation Instructions, Sections 2, 3, 4, 5). Take
care handling firebricks as they can become fragile after a
period of use.
—Sweep the appliance at this point if necessary.
—Vacuum clean any remaining ash and debris from the
inside of the appliance. Stovax offer a filter/
collection attachment for vacuum cleaners to protect
them from fire ash: Ash Clean (Stovax Part No. 2091).
—Clean the internal surfaces of the appliance using a
wire brush and scraper as required. Vacuum and brush
the resulting debris from the appliance.
—Clean the grate parts with a wire brush, and check the
parts for any damage. Replace any damaged parts
using genuine Stovax replacements parts (see below for
details).
—Check and clean the firebricks with a soft brush.
Some surface damage will occur during use. The life of
the bricks will depend on the type of fuels burnt and
the level of use. Replace damaged bricks as soon as
possible.
—Re-fit cleaned internal parts.
—Remove glass from door, discard all old rope seals and fit
new (see Maintenance and Servicing, Section 5).
—Clean the door glass using Stovax Glass Cleaner and a
soft cloth.
—Do not use cleaning agents that have a high alkaline
content, for example Stovax Gel Cleaner, on
appliances with painted glass such as the Studio, View
or CL. These are abrasive cleaning agents that
are designed to be used with heavily stained clear
glass. Use Stovax Glass Cleaner (Stovax No.4103) on
more delicate surfaces.
Do not use acidic cleaners on printed glass.
—Fit new door rope seal (see Maintenance and Servicing,
Section 6).
—Lightly oil the door catch mechanism and hinge pins.
Avoid getting oil onto the door seals and glass.
—To refresh painted finishes use Stovax Riva Midnight
black paint.
1.2 Use genuine Stovax replacement parts to keep the
appliance in safe, efficient working order. This is a list of the
maintenance products that may need be required:
This is a list of the maintenance products you may need to
use:
Task Product name
Stovax Code
Number
Glass cleaning
Stove glass cleaner
(spray on))
4103
Preventing build-
up of creosote in
flue
Protector (15 sachets) 7002
Protector (1kg tub) 7025
Sealing flue pipe
joints
Fire Cement (500g tub) 2020
Fire Cement (600g cartridge) 2021
Re-painting
Riva Midnight Black
(150ml aerosol)
RVAC011
Protecting your
hands
Heat resistant leather gloves YM-E00007
Ash Clean Vacuum Cleaner Attachment 2091
Thermic seal glue (50ml bottle) 5037
Door sealing rope
14mm Black rope seal
(handy pack)
5000
14mm Black rope seal
(25m reel)
4670H
Glass sealing rope
15mm x 2mm x 2m 4950
15mm x 2mm x 25m 4954
Mid door sealing
rope
15mm x 2mm x 2m 4952
15mm x 2mm x 25m 4957
These products, available from your local Yeoman retailer,
along with regular maintenance and use of correct fuels, will
keep the appliance in the best possible condition.
1.3 For more information about the Yeoman products please
visit our web site at www.yeoman-stoves.co.uk
1.4 Burn at a low temperature for the first day of use after any
maintenance. This allows the seals, fixing glues and paint to
fully cure.