Filter
Top Products
22
6. HEARTH FIXING
6.1 If the appliance is to be fixed to the hearth then use the
hearth mount locking tabs shown in Diagram 10.
—Position the appliance where required on the hearth
and mark the location of the two fixing holes in
the hearth mounts.
—Drill the required sized holes into the hearth.
—Use suitable fasteners to fix in place.
PR9006
Fixing holes in
hearth mounts
PR8846
Main grate
5.4 Remove riddling slider and connecting rod by unscrewing
the 6 x M8 nuts using a 10mm A/F spanner (see Diagram
9).
PR8844
Nuts
Riddling slider
Riddling rod
5.5 Replace in reverse order.
INSTALLATION INSTRUCTIONS