Filter
Top Products
20
INSTALLATION INSTRUCTIONS
—Secure with self tapping screw.
—Seal the connecting joints.
Do not use a 90˚elbow to make this connection.
The flue must be installed in accordance with manufacturers
instructions.
PR8735
Seal Collar with Fire Cement
Self tapping screw
Tee
Size Stovax Part No.
‡
5" 4516
6" 4616
Cap
PR8736
600mm min
1000mm max
unsupported
Elbow with access cover
Size Stovax Part No.
‡
5" 4512
6" 4612
Flue Pipe 915mm (3ft)
Size Stovax Part No.
‡
5" 4502
6" 4602
To chimney connection
as detailed in building
regulations
2. REMOVAL OF THE LOG GUARD
2.1 To remove the Log guard:
—Lift Log Guard clear of the supporting brackets.
—Rotate to clear the sides of the door opening.
Do not use appliance without the log guard in position.
PR8009
The flue must be installed in accordance with
manufacturers instructions.
PR8733
Self tapping
screw at rear
Flue Pipe 915mm (3ft)
Size Stovax Part No.
‡
5" 4502
6" 4602
Seal flue collar
with Fire Cement
600mm min
1000mm max
unsupported
Elbow with access cover
Size Stovax Part No.
‡
5" 4512
6" 4612
Flue Pipe 915mm (3ft)
Size Stovax Part No.
‡
5" 4502
6" 4602
To chimney connection
as detailed in building
regulations
PR8734
1.3 Rear flue pipe installation:
—Insert a tee into the flue collar. The tee piece is used as
cleaning access.
—Lift appliance into position, taking care not to damage
the hearth finish.
—Level using adjustable bolts.
—Connect tee to the chimney using flue pipe.
‡
Refer to table on page 17.