Filter
Top Products
key benefits
Available as an ‘all-in-one’ air
conditioning and heating unit in two
sizes - 2.1kW and 2.45kW*
Also available as a cooling only air
conditioning unit in two sizes -
2.1kW and 2.45kW
All-in-one’ models can operate in
cooling, dehumidification or heating
modes to maximise comfort
Easy installation from within the room -
patented folding grille system
eliminates the need for external access
The electronic control system includes
infrared remote control night function
and automatic operation
Can be installed at high or low level
for maximum flexibility & usable space
Economic and efficient, Digitemp
operates combining low power
consumption when cooling with a high
efficiency heating capacity
Digitemp uses a three speed fan
including night mode for super-quiet
operation
F
actory sealed refrigerant system
eliminates the need to connect hoses
Self-diagnostic programme for
all maintenance requirements
2 year warranty
* kW ratings are for cooling mode
only. Heating capacity for the 2.1kW
and 2.45kW are 1.9kW and
2.03kW respectively.
Digitemp is the new range of revolutionary climate control
solutions from Xpelair. An innovative "all-in-one" design,
Digitemp requires no external condenser or pipe work usually
associated with air conditioning systems.
Operated using an infrared remote control, Digitemp provides a very
flexible approach to air temperature control with the facility to automatically
cool, dehumidify and heat air by means of efficient air-to-air reverse heat
technology. For added flexibility, the stylish "slimline" wall mounted units
can be installed at high or low level to maximise floor space.
The benefits of a system that
doesn't require an unsightly
condenser are clear.
No need for planning permission
to install
Ideal for use in apartments and
multi-storey locations due to cost
effective installation
P
otentially suitable for installation
in listed buildings
Only external evidence are two
discreet grilles
No unsightly condenser to tarnish
the external façade of the building
Designed for low cost installation, Digitemp is easy to fit by an installer
requiring only two holes to an external wall. A patented folding grille
system means it can be installed entirely from inside the property making
it ideal for use in private dwellings, apartments and multi-storey locations.