Filter
Top Products
15 | P a g e
WATER DRAINAGE
When the water level of the bottom tray reaches
maximum level, the unit will beep 8 times and the
digital display will show P1 symbol. Also, the
cooling or dehumidifying function will stop and the
fan only function will start.
Continuous drainage
In COOL or DRY modes, remove the upper
drain plug from the back of the unit and install
the drain water hose (5/8 universal female
mender) with ¾” hose (can be purchased
locally).
If this part is unavailable from your local
hardware store, just attach the drain hose to the
drain firmly. The hose will fit snug which should
prevent any leaking. Place the open end of the
hose directly over the drain area in your
basement floor. Please refer to Fig.21 & 22.
Manual drainage
Carefully move the unit to a drain location,
remove the bottom drain plug and let the water
drain (See Fig. 23). The P1 symbol will
disappear and the cooling or dehumidifying
function can be started. Be sure to reinstall the
bottom drain plug before using the unit.