Filter
Top Products
14 15
Options Default Setting Additional Information
1. Do you want the OFF Select default OFF for now.
keypad lock (no key lockup) To lock the keypad, see
turned on or off? Additional Functions
section 4.8.
2. Do you want to be ON Select default ON for now.
reminded when it (13 weeks) To modify a fi lter-change
is time to change reminder, see Additional
the air fi lter? Features section 4.9.
3. Do you want to be OFF Select default OFF for now.
reminded when it (no reminder) To set a pad-change
is time to change reminder, see Additional
the Humidifi er Pad? Features section 4.10.
4. Do you want the ON Select default ON for
thermostat to work (programmable) Programmable Mode.
in Programmable Select OFF to operate in
Mode? Non-Programmable Mode.
It you select OFF, your thermostat will work as a
non-programmable unit. The clock and date will not be displayed.
Some functions, identifi ed by in this manual, are available
only in Programmable Mode.
Options Default Setting Additional Information
5. Does either a gas GAS Select GAS if you have
or oil furnace (for either gas or either a gas or oil furnace.
provide heating to oil furnace) If you do not have a
your home? gas or oil furnace select ELE.
6. Do you have a OFF If you do not have a
Heat Pump? (no Heat Pump) Heat Pump select OFF.
If you have a Heat Pump,
use the
to select (On1)
for a 1-stage, or (On2)
for a 2-stage Heat Pump
7. Do you want the FA (fast) Select SL (slow) if you
Cycle Rate to be have Hydronic (water or
Fast or Slow? steam) Heating.
Otherwise, select default FA.
8. Do you want to OFF (no Auto Select default OFF for
activate Auto Changeover) now. To set the function,
Changeover see Additional Functions
function? Section 4.11.
9. Do you want °F
temperature (Fahrenheit)
displayed in °C
(Celsius) or °F
(Fahrenheit)?
10. How much 0 Select default 0 for now.
displayed (no offset) To adjust the displayed
temperature offset temperature reading, see
do you want? Additional Functions
Section 4.12.
To determine if you have a Heat Pump and/or whether it is a
1-stage or 2-stage model, see the Appendix at the end of manual.
When you have answered all 10 questions, press the DONE icon twice.
Press the MENU icon and then press the MORE OPTIONS icon.
You will be prompted to answer 10 “Options” questions, shown below.
As each option is presented:
✔ Use the to answer each question.
✔ Use the MORE OPTIONSicon to advance to the next question.
3.3 Select options