Filter
Top Products
33
1. How can I permanently change a part of my
program?
Press
VIEW
PRGM
and
ADV
DAY
until you reach the
time/temperature schedule you want. Then
press
TIME
FWD
or
TIME
BACK
and and to
change the program. See PROGRAMMING
YOUR THERMOSTAT.
2. How can I have no change in temperature
from one time period to another?
Simply select the same temperature for each
consecutive time period. For example, you
may select the same COOL A temperature for
period 2 as you did for period 1, which means
the temperature will not change from COOL A
when period 2 begins. See PROGRAMMING
YOUR THERMOSTAT.
3. How can I finish my programming if the
display has already changed to time/tem-
perature?
During programming, if no buttons are pressed
for five minutes, the thermostat will enter the
HOLD mode and maintain a constant tem-
perature. The display will change to the time/
temperature mode. To resume programming,
press
VIEW
PRGM
and
ADV
DAY
until you return to the
point where you stopped programming. Then
you may continue to program the thermostat
normally. If you want to stop programming at
this point, press
RUN
PRGM
to start the normal
program function. See PROGRAMMING
YOUR THERMOSTAT.
QUESTIONS AND ANSWERS