Filter
Top Products
29
Program Cooling Temperatures
If outside temperature is below 50°F, we
recommend that you remove the thermo-
stat from the wall before proceeding with
the following steps to program cooling
temperatures. Personal injury and/or prop-
erty damage could result from air condi-
tioner compressor slugging. Fresh "AA"
alkaline batteries (such as Energizer
®
brand) must be installed to perform off-
wall programming. Programming away
from the wall should prevent accidental
compressor operation. BE SURE TO
PRESS
SYSTEM
HEAT-OFF-COOL-AUTO
UNTIL OFF IS DISPLAYED
BEFORE REATTACHING THE THERMO-
STAT TO THE SUBBASE!
1. To program cooling temperatures for the heat-
ing/cooling periods you have already set, press
SYSTEM
HEAT-OFF-COOL-AUTO
until COOL is displayed.
2. Press
VIEW
PRGM
once. The Monday heating/
cooling period 1 start time you programmed
earlier will be displayed, along with the cur-
rently programmed COOL A, B, C, or D tem-
perature.
3. Press
or to display the COOL A,
B, C, or D temperature you want for Monday's
heating/cooling period 1. If you want the fan to
run continuously during this period, press
FAN
ON – AUTO
until PRG FAN is displayed.
4. Press
VIEW
PRGM
, then press or to
select Monday's COOL A, B, C, or D tempera-
ture for period 2. If you want the fan to run
CAUTION
!