Filter
Top Products
20
6a. What time does the last person leave the
house in the morning?
b. What temperature should the house be at this
time? These will be your DAY temperature
settings.
7a. What time does the first person arrive home in
the evening?
b. What temperature should the house be at this
time? These will be your EVE (evening)
temperature settings.
8a. What time does the last person go to bed at night?
b. What temperature should the house be at this
time? These will be your NHT (night) tempera-
ture settings.
Now look at the factory preprogrammed times and
temperatures shown at right. If this program will
suit your needs, simply press
RUN
PRGM
to begin
running the factory preset program.
If you want to change the preprogrammed times
and temperatures, follow these steps.
1. Determine the heating and cooling temperatures
you want to use. You may select up to four heating
temperatures (HEAT A, HEAT B, HEAT C, and
HEAT D), and up to four cooling temperatures
(COOL A, COOL B, COOL C, and COOL D). Use
the table on the following page to write down the
temperatures you have selected.
To operate properly in the AUTO mode, there must
be a minimum 1
°F separation between the high-
Heating Program for
ALL days of the Week:
Cooling Program for
ALL Days of the Week:
PERIOD TIME TEMP PERIOD TIME
TEMP
1
2
3
4
5:00 AM
9:00 AM
4:00 PM
10:00 PM
70
70
70
64
1
2
3
4
5:00 AM
9:00 AM
4:00 PM
10:00 PM
78
82
78
78
NOTE