Filter
Top Products
17
Programming should be completed and battery
should be installed before changing option
switch #4.
Partial Keypad Lockout
Switch #1 set at installation (DO NOT CHANGE)
Switch #2 set at installation (DO NOT CHANGE)
Switch #3 OFF
Switch #4 ON
Switches #1 and #2 are set at installation
and should not be changed. To enable
partial keypad lockout, move option switch
#4 to ON (ensure that option switch #3 is
OFF). To disable partial keypad lockout,
move option switch #4 to OFF.
• PROGRAMMABLE BLOWER CON-
TROL — You may program the fan
blower to run continuously during any
given program period, regardless of the
cycling of the heating or cooling sys-
tem. During programming, after enter-
ing the time and temperature for the
time period, press
FAN
ON - AUTO
until PRG FAN
is displayed. To override constant fan,
press
FAN
ON - AUTO
until FAN AUTO is dis-
played.
NOTE
ON
1234