Filter
Top Products
BLUE EASY READER THERMOSTAT – NON-PROGRAMMABLE MODE
1 On the home screen display select your desired
system operating mode (Heat or A/C).
2 Press either the or button to select the
desired room temperature “setting”.
3 Press the Fan button to select the desired fan
operation, Auto or On.
4 Press Off to turn Heating and A/C system Off. Fan
will turn Off if it is On.
If your heating or A/C system is a heat pump, the
system automatically activates Auxiliary Heating when
the outside temperature is too cold for the heat pump
to effi ciently heat the home. You can manually activate
the auxiliary heating by pressing and holding the Heat
button until
Aux
Aux changes to Aux. To turn the manual
auxiliary off press the Heat button again.
Now enjoy the simple operation of your Easy Reader
Non-Programmable Thermostat.
1
3
2
4
USING YOUR THERMOSTAT
Blue Easy Reader Thermostat Homeowner’s Guide • 5