Filter
Top Products
TEMPORARY PROGRAM OVERRIDE
This feature will override the program temperature
setting for a two hour period. Press or buttons
to adjust the temperature. The display will show “Hold
Temp” to the left of the desired temperature. To cancel
the temporary setting and return to the program,
press Run. Example: If you turn up the heat during the
morning program, it will be automatically lowered later,
when the temporary hold period ends.
PERMANENT TEMPERATURE HOLD
The Permanent Temperature Hold feature bypasses
the program and allows you to adjust the temperature
manually as needed. The temperature you set in Hold
will be maintained indefi nitely. Press or buttons
to adjust the temperature. The display will show “Hold
Temp” to the left of the desired temperature. Press the
Hold button to maintain the new temperature.
1Press Heat or A/C button to turn your system On.
Press Off to turn Heating and A/C Off. Fan will turn
Off if it is On.
2Press Run or Run Sched to begin running
thermostat program
3Press either the or buttons to change the
desired room temperature “setting”.
4Press the Fan button to select the desired fan
operation.
AUXILIARY HEATING
Programmable or Non-Programmable
If your heating or A/C system is a heat pump, the
system automatically activates Auxiliary Heating when
the outside temperature is too cold for the heat pump
to effi ciently heat the home. You can manually activate
the auxiliary heating by pressing and holding the Heat
button until
Aux
Aux changes to Aux. To turn the manual
auxiliary off press the Heat button again.
USING YOUR THERMOSTAT – PROGRAMMABLE MODE
16 • Blue Easy Reader Thermostat Homeowner’s Guide