Filter
Top Products
29
QUESTIONS AND ANSWERS
1. How can I permanently change a part of
my program?
Press
VIEW
PRGM
until you reach the time/tempera-
ture schedule you want. Then press
TIME
FWD
or
TIME
BACK
and and to change the
program. See PROGRAMMING YOUR
THERMOSTAT.
2. How can I have no change in tempera-
ture from one time period to another?
Simply select the same temperature for
each consecutive time period. For example,
you may select the same weekday EVE
cooling temperature as you did for weekday
DAY, which means the temperature will not
change when the EVE period begins. See
PROGRAMMING YOUR THERMOSTAT.
3. How can I finish my programming if the
display has already changed to time/
temperature?
During programming, if no buttons are
pressed for five minutes, the thermostat will
enter the HOLD mode and maintain a con-
stant temperature. The display will change
to the time/temperature mode. To resume
programming, press
VIEW
PRGM
until you return to
the point where you stopped programming.
Then you may continue to program the
thermostat normally. If you want to stop
programming at this point, press
RUN
PRGM
to start