Filter
Top Products
22
weekday and weekend programs (for example,
you may select 5:00 AM and 70° as the weekday
MOR heating start time and temperature, and
choose 7:00 AM and 76° as the weekday MOR
cooling start time and temperature). Use the
following table to plan your program time peri-
ods, and the temperatures you want during each
period. You may also want to look at the sample
program table to get an idea of how the thermo-
stat can be programmed.
ENTERING YOUR PROGRAM
Follow these steps to enter the heating and
cooling programs you have selected.
We recommend that you remove the thermostat
from the wall for programming (especially for
entering cooling programming). Fresh “AA” En-
ergizer
®
alkaline batteries must be installed to
perform off-wall programming. BE SURE TO
USE
SYSTEM
SWITCH
TO TURN THERMOSTAT OFF
BEFORE REATTACHING THERMOSTAT TO
SUBBASE!
You cannot program the thermostat with the
SYSTEM SWITCH in the AUTO position.
Set Current Time and Day
1. Press
SET
CLOCK
once. The display will show min-
utes only.
EXAMPLE:
2. Press and hold either
TIME
FWD
or
TIME
BACK
until you
reach the correct minutes.
NOTE
NOTE