Filter
Top Products
Page 11
LIQUID MEASURING THERMOMETER
Most WhisperKOOL systems come equipped with a liquid temperature measuring thermometer probe . This
self calibrating probe contains a sensor chip, which actually communicates back and forth to the thermostat.
This results in a consistent liquid temperature as air temperature uctuates
Measuring liquid temperature has a couple unique advantages:
1. The temperature of the wine can be more precisely controlled, ensuring a more consistent overall
temperature.
2. The system will switch on/o less often, extending cooling system life.
To use the thermostat:
1. Fill an empty wine bottle 3/4 full with room temperature tap
water
2. Press bottle probe securely into bottle
3. Place the bottle with probe into a level rack space. Avoid pull-
ing too much on the probe cord, it may become disconnected
resulting in non-operation of the unit.
Remember: The WhisperKOOL System maintains cellar environ-
ment based on the liquid temperature. It is ideal to place the
probed bottle lower in the racking so that it is not near cold supply
air.
Note: When performing a ducted or remote installation, it is cru-
cial to not forget about routing the bottle probe into the cellar. The
system must have the sensing bottle in the cellar to maintain the
cellar environment.