Page 9
If you have a system with a remote keypad, please review this section for installation.
Note: 50 feet of communication line is included, the keypad can be installed up to 300 line feet away. Lon-
ger lengths of communication line can be ordered by calling 1-800-343-9463 ext. 751.
Run your communication line to the desired location, be sure not to have any harsh kinks in the lines route.
Attach the connection wire as shown below, with the red wire in the upper connection slot and the black
wire in the lower slot. It is also important to run your bottle probe line at this time,
To install the remote keypad box, remove the rear mounting bracket and secure the bracket to the wall in
the desired location. When running the communication line through a wall, be sure to run the line in the
rear mount position and insert the supplied plug in the side hole on the box. Reattach the keypad box to
the bracket.
Red Wire
Black Wire
REMOTE KEYPAD: INSTALLATION AND CONFIGURATION
TM
TM
TM
TM
Connection wire in Side Mount conguration Connection wire in Rear Mount conguration