Whirlpool WHES30 Water System User Manual


 
17
Program the Water Softener -- Model WHES20
UP button
DOWN Button
PROGRAM button
RECHARGE button
Display
PRESSTO SCHEDULE
HOLDTO ST ART
+
PROGRAM
RECHARGE
Figure 10
If you have questions about installation, progr amming, oper ating and routine maintenance...
call 1--866--986--3223, Monday -- Friday, 8 am to 9 pm, EST.
When the transformer is plugged into the electrical outlet, a mode l code and a test number ( example:
s3.0), begin to flash in the faceplate display. Then, 12:00 PM and the words “PRESENT TIME” begin
to flash.
NOTE:
If -- -- -- -- shows in the display, press the UP
+
or DOW N
button u ntil LE20
shows in the display. Then, press the
PROGRAM button to set, and change to the
flashing “PRESENT TIME” display.
Set Time of Day
If the words “PRESENT TIME” do not show in the display, press the PROGRAM button until they
do.
1. Press the
+
Up or
Down buttons to setthe pre sent time. Up moves the display ahead; down
sets the time back.
PM
PRESENTTIME
PRESENTTIME
AM
Be sure AM or PM is correct.
NOTE:
Press buttons and quic kly release to slowly advanc e the display. Hold the buttons
down for fast advance. This procedure a pplies for all following settings.