Filter
Top Products
Cleaning Your Air Conditioner
Proper use and care of your air conditioner will
help ensure longer life of the unit and lower
operating costs. Follow these instructions
carefully. Call your Whirlpool servicing dealer for
an annual checkup.
Filter
Screw
Electrical Shock and Fire Hazard
l Unplug power cord from receptacle
before cleaning unit. Failure to do so
could result In electrical shock or per-
sonal injury.
l Do not use flammable fluids, sohrents,
abrasive cleaners, or strong detergents.
Fire or product damage could result.
Cleaning the front panel
1. Unplug power cord.
2. Remove the front panel from unit when
cleaning. Remove two screws from bottom
edge of front panel.
3. Lll the front panel up and toward you.
4. Remove slide-out filter and clean separately.
(See “Cleaning the filter” below.)
NOTE: Front does not have to be removed to
clean fitter.
5. Clean front panel with warm water and mild
soap or detergent. Use a soft cloth. Rinse and
dry. Replace front panel.
6. Wipe control panel clean with a soft, dry cloth.
Cleaning the filter
The filter is cleanable. A clean filter helps remove
dust, lint and other particles from the air. Check
every two weeks to see if filter needs cleaning.
1. Remove filter by sliding the filter up and out
the top of front panel.
2. Clean filter, using a vacuum cleaner.
OR
3. lf very dirty, wash filter with warm water and
mild detergent. Air dry thoroughly before
replacing.
4. Replace filter by sliding it back down into
opening at the top of front panel.
5