Filter
Top Products
To modify the temperature:
l Press the WARMER Button to raise the
temperature of the room.
l Press the COOLER Button to lower the
temperature of the room.
NOTE: Each press alters the temperature
approximately 1 “C.
To deactivate the HEAT ONLY Cycle:
You can deactivate the HEAT ONLY Cycle
two ways:
l Press the OFF Button.
OR
l Activate another cycle
(for example: AUTO COOL).
Using the DRY ONLY Cycle
The DRY ONLY Cycle allows your air
conditioner to operate as a dehumidifier. It
removes excess moisture from the room air
without providing much cooling. The cycle is
preset to operate most efficiently at LOW fan
speed.
To activate the DRY ONLY Cycle:
l Press the DRY ONLY Button.
NOTE: When the cycle is active, the
indicator light on the DRY ONLY Button
will be lit.
To modify the fan speed:
l Press the FAN SPEED Button.
NOTE: Each press advances the fan
speed:
LOW --) HI --) MED + LOW
To deactivate the DRY ONLY Cycle:
You can deactivate the DRY ONLY Cycle
two ways:
l Press the OFF Button.
OR
l Activate another cycle
(for example: AUTO COOL).
0
FAN SPEED