Filter
Top Products
Modifying the temperature
Although the AUTO COOL Cycle has an
initial factory-preset cooling temperature,
you may decide the room is too cool or too
warm. When you change the temperature
from the factory-preset, the air conditioner
uses fuzzy logic (computerized “learning”) to
remember your preferences. Over time, the
unit “learns” exactly what conditions make
you most comfortable.
To modify the temperature:
l Press the WARMER Button to raise the
temperature of the outgoing air.
/\
WARMER
l Press the COOLER Button to lower the
temperature of the incoming air.
NOTE: Each press alters the temperature
approximately 1 “C.
Modifying the fan speed
Although the AUTO COOL Cycle automati-
cally chooses the proper fan speed to cool
the room, you may desire to increase or
decrease the amount of air blowing into the
room.
To modify the fan speed:
l Press the FAN SPEED Button.
NOTE: Each press of the FAN SPEED
Button advances the fan speed through
the cycle:
HI-,MED+LOW+HI
0
FAN SPEED
Using the AIR SWING feature
The AIR SWING feature tells your air
conditioner to move the air output louvers
side-to-side and swing the cooled air
through the room.
To activate the AIR SWING feature:
l Press the AIR SWING Button.
To deactivate the AIR SWING feature:
l Press the AIR SWING Button again.
AIR
0
SWING
7